We will send you an email to reset your password.
€0,00
IMPORTANT
IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT
ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM
ARMCHAIR SHELL SEATS FIXED 4 POINTS EPSILON | STADIUM SEATS
Shell Seat with Backrest.
Fixed at 4 points. It can be mounted on the floor or on a step with an additional metal bracket.
Center drain hole.
Meets UEFA/FIFA standards for stands.
Weight = 1,750g.
Delivery Time: Consult Place of Origin: Spain Shipping Type: Sea and Air (Note: The actual transportation time will be defined at the time of purchase).
DOWNLOAD CATALOG
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SHELL SEATS FIXED WITH METAL BRACKETS BETA 101 STEP MOUNTED | STADIUM SEATS The Shell Seat with Backrest mounts to the step with a metal bracket. 1,350 g plastic casing, 3,000 g metal support; The total weight of the seat is 4,350 gr. The housing is fixed to the metal bracket at 4 points and then the bracket is mounted to the step at 3 points. Ergonomic base that allows correct drainage of fluids with its downward slope. Meets UEFA/FIFA standards for stands...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SHELL SEATS FIXED WITH METAL BRACKETS BETA 201 FLOOR MOUNTED | STADIUM SEATS The Shell seat with backrest is fixed to the floor with a metal bracket. 1,350 g plastic casing, 3,000 g metal support; The total weight of the seat is 4,350 gr. The case is fixed to a metal stand at 4 points and then the stand is mounted to the ground at 3 points. Ergonomic base that allows correct drainage of fluids with its downward slope. Meets UEFA/FIFA standards for...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SHELL SEATS FIXED WITH METAL BRACKETS EPSILON 101 STEP MOUNTED | STADIUM SEATS The Shell Seat with Backrest mounts to the step with a metal bracket. 1,750 g plastic casing, 3,000 g metal support; The total weight of the seat is 4,750 gr. The housing is fixed to the metal bracket at 4 points and then the bracket is mounted to the step at 3 points. Center drain hole allows liquids to drain. Meets UEFA/FIFA standards for stands. Delivery Time: Consult Place of...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SHELL SEATS FIXED WITH METAL BRACKETS EPSILON 201 FLOOR MOUNTED | STADIUM SEATS The Shell Seat with Backrest mounts to the step with a metal bracket. 1,750 g plastic casing, 3,000 g metal support; The total weight of the seat is 4,750 gr. The housing is fixed to the metal bracket at 4 points and then the bracket is mounted to the step at 3 points. Center drain hole allows liquids to drain. Meets UEFA/FIFA standards for stands Delivery Time: Consult Place of...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM SEFES 101 OPEN ARMS ARMCHAIR | STADIUM SEATS Seat and back units The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM SEFES 102 CUPHOLDER ARMCHAIR | STADIUM SEATS Seat and back units The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SEFES 103 WRITING TABLET | STADIUM SEATS Sefes 103 writing tablet. Seat and backrest units. The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units The side legs are made of 40 x 60 x 1.5 mm steel...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SEFES 111 CLOSED ARMS | STADIUM SEATS Seat and back units The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SEFES 112 CLOSED WOOD ARMS | STADIUM SEATS Seat and backrest units. The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SEFES 113 CLOSED ARM WITH WRITING TABLET | STADIUM SEATS Seat and backrest units. The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units. The side legs are made of 40 x 60 x 1.5 mm steel tube,...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ARMCHAIR SEFES 121 CLOSED ARMRESTS | STADIUM SEATS Seat and backrest units. The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units. The foot parts of the seats are made of impact-resistant virgin plastic and have a thickness of...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM FLEX ARMCHAIR A10 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM FLEX ARMCHAIR A15 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM FLEX ARMCHAIR P10 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM FLEX ARMCHAIR P20 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM FLEX ARMCHAIR P30 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The foot parts of the seats are made of impact-resistant virgin plastic and have a thickness of 8 mm. Armrests made of high-density polyurethane material (60 ±...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM FLEX ARMCHAIR Y40 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM SIGMA VVIP BOX SEAT ARMCHAIR | STADIUM ARMCHAIR The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM TREND S30 ARMCHAIR | STADIUM SEATS Seat and backrest units. The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. Leg and armrest units The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ROYAL 101 STANDARD ARMCHAIR | STADIUM SEATS Corrosion, which is the biggest disadvantage for indoor and outdoor installations, has been prevented by the sandblasting and coating process before powder coating for outdoor use. It can be upholstered with fabric or vinyl. Optional armrest, cup holder and writing pad. Plastic caps on the backrest and under the seat prevent breakage. The vinyl leather and plastic parts are sun resistant thanks to the UV additives used. The artificial leather, foam, armrests and plastic covers are fire...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ROYAL 102 ARMREST ARMCHAIR | STADIUM SEATS Corrosion, which is the biggest disadvantage for indoor and outdoor installations, has been prevented by the sandblasting and coating process before powder coating for outdoor use. Can be upholstered with fabric or vinyl. Optional armrests, cup holders and writing pad. Plastic caps on the backrest and under the seat prevent breakage. The vinyl leather and plastic parts are sun resistant thanks to the UV additives used. The artificial leather, foam, armrests and plastic covers are fire resistant...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ROYAL ARMCHAIR 211 PRESS SEAT | STADIUM SEATS It is produced to be used as a chair for members of the press. The seat is used fixed (not tilted up), the swivel foot is mounted on the bottom of the seat and then fixed to the floor. Plastic caps on the backrest and under the seat prevent breakage. The vinyl leather and plastic parts are sun resistant thanks to the UV additives used. The artificial leather, foam, armrests and plastic covers are fire resistant...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ROYAL ARMCHAIR 301 ON MONORAIL | STADIUM SEATS Corrosion, which is the biggest disadvantage for indoor and outdoor installations, has been prevented by the sandblasting and coating process before powder coating for outdoor use. It can be upholstered with fabric or vinyl; It is designed to accommodate armrests, armrests, cup holders or desks. With its versatile design, the needs of all sports facilities can be covered with a single type of product. Plastic caps on the backrest and under the seat prevent breakage. The...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ROYAL PRESS ARMCHAIR | STADIUM SEATS The table top and front panel are made of compact 12mm G-COM HPL material. It is resistant to sun and water. Depending on the request, the table can be produced as; Use for one person: 60 cm, Use for two people: 120 cm and Use for three people: 80 cm. The table legs are made from laser cut steel tubes, outdoor powder coated at 200 Celsius for weather resistance. The table is mounted on a platform 80 cm...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ALYA PRESS ARMCHAIR | STADIUM SEATS The table top and front panel are made of compact 12mm G-COM HPL material. It is resistant to sun and water. Depending on the request, the table can be produced as; Use for one person: 60 cm, Use for two people: 120 cm and Use for three people: 80 cm. The table legs are made from laser cut steel tubes, outdoor powder coated at 200 Celsius for weather resistance. The table is mounted on a platform 80 cm...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM OMEGA PRESS ARMCHAIR | STADIUM SEATS The table top and front panel are made of compact 12mm G-COM HPL material. It is resistant to sun and water. Depending on the request, the table can be produced as; Use for one person: 60 cm, Use for two people: 120 cm and Use for three people: 80 cm. The table legs are made from laser cut steel tubes, outdoor powder coated at 200 Celsius for weather resistance. The table is mounted on a platform 80 cm...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM CLUB PLAYER BENCH SEAT | STADIUM SEATS Seat and backrest units. The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The seats are fixed, there is no tipping mechanism. Leg and armrest units. The feet of the seats are made of 100 mm diameter and 2.5 mm tube, and the...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM AQUA ARMCHAIR A20 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM AQUA ARMCHAIR A30 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The seats are fixed, there is no tipping mechanism. Leg and armrest units. The feet of the seats are made of 100 mm diameter and 2.5 mm tube, and the pieces connecting to the floor...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM AQUA ARMCHAIR A40 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM AQUA LINE ARMCHAIR | STADIUM ARMCHAIR The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The feet of the seats are upholstered with laminated fabric or vinyl on 18 mm MDF board. The armrests are upholstered with laminated fabric or leather. The...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM AQUA Y50 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ELIT A10 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The seats have a spring mechanism that allows the seats to close automatically. The feet of the seats are made of 100 mm diameter and 2.5 mm tube, and the pieces connecting to the floor...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ELIT A20 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The seats have a spring mechanism that allows the seats to close automatically. The feet of the seats are made of 100 mm diameter and 2.5 mm tube, and the pieces connecting to the floor...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ELIT ARMCHAIR K50 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The seats have a spring mechanism that allows the seats to close automatically. Leg and armrest units. The feet of the seats are made of 100 mm diameter and 2.5 mm tube, and the pieces...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ELIT Y50 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The seats have a spring mechanism that allows the seats to close automatically. The feet of the seats are made of 100 mm diameter and 2.5 mm tube, and the pieces connecting to the floor...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM ELIT Y60 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The seats have a spring mechanism that allows the seats to close automatically. The feet of the seats are made of 100 mm diameter and 2.5 mm tube, and the pieces connecting to the floor...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON ARMCHAIR A20 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON ARMCHAIR A50 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON ARMCHAIR K50 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON ARMCHAIR K55 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON R30 ARMCHAIR | STADIUM ARMCHAIRS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The feet of the seats are upholstered with laminated fabric or vinyl on 18 mm MDF board. The armrests are upholstered with laminated fabric or leather. The...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON ARMCHAIR S45 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON ARMCHAIR S55 | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON Y40 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON Y45 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
€0,00
IMPORTANT IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM PANTHEON Y70 ARMCHAIR | STADIUM SEATS The seats and seat backs are made of polyurethane material in aluminum molds designed according to human anatomy, in accordance with 50 + - 10% density and Mvss 302 fire standards. Inside the seat and backrest pads, there is a durable steel frame. The tip mechanism operates by gravity without springs. The side legs are made of 40 x 60 x 1.5 mm steel tube, and the parts fixed to the floor are made of 2 mm thick...
