IMPORTANT

IF YOU WANT A DETAILED BUDGET YOU CAN REQUEST IT

ATTACHING PROJECT PLANS TO INFO@ARQMAT.COM

PORCELAIN RAISED FLOOR | OUTWASE

Outwase It is used for outdoors and provides a very stable and highly resistant ceramic surface. The panels are made up of a ceramic tile with a reinforcement on the back of it that, increasing only between 2-3mm, gives the whole unit high resistance. The reinforcement is composed of a polymer matrix with a fiberglass mesh embedded inside. From now on, this reinforcement will be called STRONGCID.

The flooring pieces are arranged directly supported on polypropylene or W-PLOUT plots, which form a grid of height-adjustable support points, being able to adapt to the various variations in the height of the support plane.

The joints of the Outwase raised floor system are always open, allowing water to drain between them, while preventing the accumulation of water and the possible formation of icy surfaces in cold climates, which considerably reduces the risk of falls due to slipperiness on the surface of the flooring, thus improving the degree of safety of the system. It is a specific, reticular and continuous joint, determined by small tabs arranged in the support plane of each W-PLOUT, which allow the correct arrangement of the flooring pieces, configuring the open joint system of the Outwase set.